WHAT TO CHECK IF YOUR HOT WATER SERVICE IS NOT FUNCTIONING

What to Check if Your Hot Water Service is Not Functioning

What to Check if Your Hot Water Service is Not Functioning

Blog Article

Schedule Service Now

What're your thoughts and feelings on What Would Cause My Electric Water Heater to Stop Working??



Lots of modern houses utilize an electric hot water heater for their heating unit, due to its ease as well as convenience of use. Nevertheless, just like any other electric home appliances, problems may arise with its use, suddenly. It can be actually discouraging to awaken to a chilly shower as opposed to a warm one or having your bath with water that isn't warm enough or perhaps also warm. Whatever the case may be, hot water heater troubles can be fairly stressful. Fortunately, we've made a checklist of possible options to your water heater concerns. There are a number of aspects that might create most of these problems, maybe a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you switch off the primary power supply for safety. Whatever the issue is, getting it fixed must not pose excessive of an issue if you adhere to these steps:

Inspect Your Power Supply:


As fundamental as this may seem, it is really essential. Without appropriate power, your hot water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the issue, simply turn it off and on once more. Replace any type of damaged or worn-out fuse. Evaluate the device with power after these changes to see if it's now working.

Examine the Heating Element in the Water Heater:


If it's not a power issue, then attempt looking into your burner if it is still working. Test each of your heating elements to ensure the trouble isn't with any one of them. If any of them is damaged, change that part and afterwards examine whether the hot water is back on.

Check Your Thermostat:


If your water heater still isn't functioning or the water coming out isn't warm enough, you may require to examine the temperature settings on your upper thermostat. Make certain the breaker is turned off prior to doing anything. Open up the access panel as well as press the red switch for temperature level reset above the thermostat. This must aid warm the water. Turn the circuit breaker back on as well as examine if the trouble has been fixed.

Call A Specialist:


If after changing all faulty parts as well as resetting your temperature level, the hot water heater still isn't working, you may need to get in touch with a professional plumber for an expert viewpoint. The trouble with your heating system could be that the hot and cold faucets have been switched or it may be undersized for the amount of warm water required in your house. Whatever the instance might be, a specialist plumber would help solve the problem.

Final thought


Water heater issues are not constantly major. A lot of them are because of minor problems like a blown fuse or damaged burner. Changing the malfunctioning components must suffice. Nonetheless, if you are still not able to resolve the trouble, give a call to your local plumber ahead to get it taken care of.

8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


How to Troubleshoot and Repair an Electric Water Heater

Do you enjoy reading about Hot Water Heater Repair? Try leaving a remark further down. We will be glad to listen to your opinions about this review. We hope that you visit us again in the near future. Enjoyed our blog posting? Please share it. Let other people discover it. Thank you so much for your time invested reading it.




Get Quote Now

Report this page